top of page
Search
Dec 1, 2022
Magnetron Revolver: Build Complete
The Kimber K6s DASA Magnetron Revolver is finally complete. It's taken more than 5 months from design to final assembly. I've learned a...
Nov 22, 2022
Magnetron Revolver: The Build Part IX - Finishing the Magnetic Holster
We left off Part VIII with the barrel shroud and its steel "cage" complete. Now that I had the final shape of the shroud I could finalize...
Nov 19, 2022
Magnetron Revolver: The Build Part VIII - Finishing the Barrel Shroud
We left off Part VII with a good start on the holster and a lesson in magnets. I took a pause on the holster to finally fix the issue of...
Nov 14, 2022
Magnetron Revolver: The Build Part VII - Starting The Magnetic Holster
We left off Part VI with the barrel shroud mostly done, but needing a fix for the set screw nuts which kept backing out. While I pondered...
Nov 10, 2022
Magnetron Revolver: The Build Part VI - Barrel Shroud Done (?)
We left off Part V with nuts glued in the bottom of the acetal barrel shroud in place, ready to be sanded smooth and the Hoptic .357 Mag...
Oct 29, 2022
Magnetron Revolver: The Build Part V - Barrel Shroud Mount & Quiver
We left off part IV with the second acetal barrel shroud loosely mounted and the steel front cap in place. It was now time to improve the...
Oct 18, 2022
Magnetron Revolver: The Build Part IV - Barrel Shroud Shaping Cont.
We left off part III of the build with the second acetal barrel shroud fit to the revolver and cut down to size. This one was looking...
Oct 1, 2022
Magnetron Revolver: The Build Part III - Barrel Shroud Shaping
We left off part II of the build with the acetal barrel shroud fit to the revolver and cut down to its general shape. It was now time to...
Sep 8, 2022
Magnetron Revolver: The Build Part II - Starting the Barrel Shroud
In Part I of the build, I got the red dot mount just about ready to go. It was now time to start on what will be the most difficult part...
Sep 1, 2022
Magnetron Revolver: The Build Part I - Mounting the Red Dot
If you check out the design overview for this Kimber K6S DASA "Magnetron" revolver build you'll see that this build has 3 main elements:...
Aug 8, 2022
Magnetron Revolver: Initial Design
It is now time to return from a sidetrack of prop making known as the Hand Canon build, and back to the real pew-pew wheel gats. This...
Send me a note.
bottom of page